ブックタイトルWEB GUIDE CONTROL SYSTEMS

概要

WEB GUIDE CONTROL SYSTEMS

6Liteguide Controller AE500? This controller has been made compact and lightweight by limiting its functions tothose that are needed in the operation of slitters and inspection machines.? The LCD touch-screen panel means that you can perform operations in a singleaction.? When used with the LH500, the controller can display the signal waveform so thatthe operator can check the line and edge detection status.The AE500's best performance is achieved in combination with either the NIC100/NIP100 or the LH500.Operability has been enhanced by the use of touch type display and control panels and icons that can be operatedintuitively.Power supplyvoltageDC +24 V, 4 A (peak correlation 6 A approx. 50 msec)? When the NIC100 + NIP100 are used, the power supply is DC +24 V, 6 A or greater.(when controller and motor are to be used with a shared power supply)* If power supplies are provided separately, the following capacities should be used.Controller power supply: DC +24 V, 1 A (When the NIC100 + NIP100 are used,the power supply is 3 A.)Motor power supply: DC +24 V, 3 A (peak correlation 6 A approx. 50 msec)Power supply fuse: 3.15 A, DC 24 V (time-lag type)Mass 1.7 kgOperatingenvironmentTemperature range: 0 to +50°CHumidity range: 35 to max. 85% RH (no condensation)Vibration resistance: able to withstand a vibration amplitude of 3.5 mm, 1 G, 3 to150 Hz, in 3 axes (for a duration of 1 hour)Power supply noise: 2.5 kVp-p, normal mode, common mode, 50 ns, 1 μs pulse widthAtmosphere: Operate in an environment with no moisture droplets, flammablegas or dust.Liteguide Amplifier AE120 SeriesWe offer two model types for the AE120 Liteguide Amplifier series, a panelattachment type and a wall attachment type.Liteguide Amplifier AE120 (panel-mounted type)Liteguide Amplifier AE122 (wall-mounted type)Model DescriptionAE120 Panel mounting typeAE122 Wall mounting typeInputSensor PH16B, UH01Centering SI12-NE4Fine adjuster MW3133Remote controlunitRP100Auto/Manual/CenteringLock function Contact input 15 V DC, 1 mAOnputMotor DC±24 V 1 ALamp powersupply DC12 V 1.8 WEnd alarmContact output: 1 AContact capacity: 250 V AC, 0.1 A24 V DC, 0.1 APower supply 100 to 240 V AC (automatic changeover) 50/60 HzPower consumption 100 VA (Note)Ambient temperature 0 to +50°CAmbient humidity 35-85% RH (no condensation)Protective structure rating IP30Mass AE120: 2.5 kg, AE122: 2.7 kgNote: If a breaker or other device is installed externally, please set the breaker capacity to atleast 4 A, taking into account the inrush current of the internal power supply.Liteguide