ブックタイトルWEB GUIDE CONTROL SYSTEMS

概要

WEB GUIDE CONTROL SYSTEMS

System components 9AC servo actuator seriesThis actuator has an integrated speed-reduction gear (planetarygear) and ball screw, which minimizes gear backlash.A totally enclosed structure that combines a highly efficient ballscrew and an AC servo motor.Solidly built, with an integrated speed-reduction and ball screw.Model StrokemmSpeedmm/sThrustkNMasskgAmbienttemperatureAmbienthumidityProtectivestructureratingMotorOutput(W)A031-80-20 8022.5* 0.33.20 to +40°C 30-80%RH(no condensation)Indoortype 50A031-150-20 150 3.7* Speeds shown are when unloaded.Model StrokemmSpeedmm/sThrustkNMasskgAmbienttemperatureAmbienthumidityProtectivestructureratingMotorOutput(W)A151-150-20 13524* 1.560 to +40°C 30-80%RH(no condensation)IP40Indoortype100A151-200-20 185 7* Speeds shown are when unloaded.? High-precision, high-speed control? This actuator uses an AC servo motor (brushless) and issuitable for clean environments.? High-precision, high-speed control? This actuator uses an AC servo motor (brushless) and issuitable for clean environments.Model A352-150-20Nominal speed Approx. 20 mm/s(when motor speed is 2000 min-1)Mechanical stroke 150 mm * stroke between the reed switchesUsable stroke 140 mm * stroke between the reed switchesThrust 3.5 kNMotor specifications Output 0.2 kWVoltage 200 V ACLubrication Grease appliedPiston rod rotationaltorque Approx. 6 N・mAmbient temperature 0 to +40°CAmbient humidity 30-80% RH (no condensation)Relative humidity No more than 80%RHProtective structurerating IP40 Indoor typeMass 23 kgPaint color(standard color) 7.5BG 4/6 (RoHS)AC servo actuator A031AC servo actuator A352AC servo actuator A151AC servo driver unit model SP-***This unit contains essential devices such as a servo driver, circuitprotector, relay, and terminal block. It can be located betweenthe Liteguide Controller and the AC servo actuator, to simplifythe wiring between the components in the system.These actuators are connected to an AC servo driver unit, and are primarily used as drives for EPC systems.Power source o1; 200V AC; 50/60 Hz; 1.0 kVAAmbient temperature 0 to +50°CStorage temperature -20°C to +70°C (no condensation)Ambient humidity 45-85% RH (no condensation)Protective structure rating IP20Installation Wall mounting, panel, or shelfMass 9.2 kgNote: AC servo drivers are used in speed- or torque-control modes.Controller Thrust Servo driver ratingSP-1510.3 kN 50 W1.5 kN 100 WSP-352 3.5 kN 200 W