ブックタイトルWEB GUIDE CONTROL SYSTEMS

概要

WEB GUIDE CONTROL SYSTEMS

25Electric-hydraulic modelElectric-hydraulic modelElectric-hydraulic modelInput -200 to 0 to +200 mA DC(Coil resistance: approximately 20 Ω)Motor The power supply depends on the specifications.3-phase, 1.5 kW, 4-pole, totally enclosed, fan-cooledElectromagnetic valve Select the power supply according to the specifications(single phase)Max. operating pressure 5.0 MPa (Full cut-off 6.0 MPa)Pump capacity (No load) 12.5 L/min (60 Hz), 10.5 L/min (50 Hz)Pump type No loadMax. operating force 24.6 kN (Cylinder bore 80 mm)Max. operating speed with no load 60 mm/s (Cylinder bore 80 mm)Ambient temperature -10 to +40°CHydraulic fluid Regulator Oil 46 or equivalentViscosity of hydraulicfluid during operation Approx. 20 to 80 cStOil required 26 LMass Approx. 65 kg (excluding oil)Installation HorizontalMODELM820-AM (High-output/High-response type)Power Guide UnitSystem components Servoguide MK-IV.MMODEL M721-AM (High-load type)Input -250 to 0 +250 mA DC (Coil resistance: approximately 20 Ω)MotorSelect the power supply depending on the specifications(see model symbols on p. 23)3-phase, 0.75 kW, 4-pole, totally enclosed, fan-cooledElectromagnetic valve Select the power supply according to the specifications (single phase)(see model symbols on p. 23)Max. operating pressure 2.5 MPa (Full cut-off 3.0 MPa)Pump capacity (No load) 9 L/min (60 Hz), 7.5 L/min (50 Hz)Ambient temperature -10 to +40°CHydraulic fluid Regulator Oil 46 or equivalentViscosity of hydraulicfluid during operation Approx. 20 to 80 cStOil required 26 LMass Approx. 49 kg (excluding oil)Installation HorizontalMODEL M510-AM (Controller element high-pressure, high-precision type)This is a single controller without the hydraulic unit.Input -250 to 0 +250 mA DC (Coil resistance: approximately 20 Ω)Electromagnetic valve Select the power supply according to the specifications(see model symbols on p. 23)Max. operating pressure 5.0 MPaPump capacity (No load) 9 L/minAmbient temperature -10 to +40°CHydraulic fluid Regulator Oil 46 or equivalentViscosity of hydraulicfluid during operation Approx. 20 to 80 cStMass 6 kg (excluding oil)Installation HorizontalThe Model M820-AM controller incorporates our industrial servo valves (Powerguide valves), giving it a greater poweroutput and responsiveness than other models.Model M721-AM is a high-power Servoguide which can be applied to high loads and high speed lines.